Does Your Online Business Need Help

Headline News

Gulf Oil Spill could have been stopped in One Week says Whistleblower

leave a comment

Free Live Cams (Adults only)

Free Live Cams – Transsexual Women  (Adults only)

Free Live Cams 2 – More Transsexual Women  (Adults only)

Edited by Robert D. Morningstar

An Oil Industry whistleblower has revealed to UFO Digest that BP’s priority never was to shut down the blowout and seal the Macondo Well.

Neville Dragon, an oil industry insider, goes on to assert:

They were willing to poison the Gulf and the Atlantic via the Gulf Stream current and much of the North American continent via air-borne evaporation of “CoRexit,” the toxic and deadly oil dispersant, which is now spreading throughout the Gulf of Mexico.“  

The whistleblower, Neville Dragon (not his real name) states emphatically:

“They had the proven technology to do that sitting on a shelf at Baker Hughes OilWell Tool Company(a division of Halliburton) in Houston.

The device is a blowout-killing, ’stabbing spear’.

According to Neville, the Baker-Hughes oil well blowout spears were secretly developed for U.S. DoD when Saddam threatened to blow up the 900 plus wells in Kuwait.

Ten of these super tools were used to plug up wells and then secretly hidden from the media as a decision was made by George Bush and the Emir to use the old and slow original Red Adair technology of water and dynamite, which took 2 weeks to shut in the oil well fires and replace the “Christmas trees” (support structures) blown off the wells by the Iraqi demolition teams. The Bush Administration did this in order to force the Iraqis to pay reparations through UN mandates of $20 billion for the unnecessarily burned up oil.

The blowout spears consisted of a 2.5-inch OD steel rod with a 1.5-inch hole drilled through the entire length of the spear.  On the business end that shut off the oil flow was a stainless, crossed meshed wire inflation device some 3 feet long that were fitted tightly over the rod and sat in a 3-foot section of the spear with a 1/4 inch relief.  The mesh was secured to the spear by robust clamps at each end of the machined relief, holding the inflator mesh wire band.

Under the band was a very rugged plastic material that was inflated by heavy drilling mudforced by 3000 PSI of compressed air to inflate the sealing mesh band.  The end of the spearsticking out of the well had 3 closing ram valves near the top end activated by solenoids that could rapidly shut off the flow of burning oilflowing through the spears without hydraulic shock. 

The spears were fire-proofed with an ablative material (made originally for the NASA Apollo command module re-entry heat shield) and could be easily inserted into the burning oil flowfrom a boom on a truck  and down into the riser pipe left on the top of the well after the explosions blew off the Christmas trees.   Water was sprayed on the fire at high pressure to bend the flame over allowing the “dog dick” hot rod spears to be inserted into the well. 

It took all of about 30 minutes to approach the well and shut in the blowout and in so doing extinguish the flame, meaning all the Kuwait oil fires could have been extinguished in a month instead of the 9 months it actually took to shut-in all 900 burning oil wells. 

The Baker-Hughes blowout spears could have killed the blowout in under a week.

internet site reference: LINK

Written by admin

July 22nd, 2010 at 7:11 am

Posted in Uncategorized

Tagged with ,

Leave a Reply

Featured Advertisers